• Available in different sizes including:


    2 oz Needle Bottle(2N)
    2 oz Screw Top(2F)
    4 oz Needle Bottle(4N)
    4 oz Pump Spray(4P)
    5 oz Aerosol (GS-5A)
    11 oz Aerosol(11A)
    1 Gallon(1G)
    5 Gallon(5G)
    55 Gallon(5G)

  • GETSOME1000 Applications & Uses

  • Our Products

  • Electronics

    GETSOME 1000 LUBRICANT IS A VERY VERSATILE, HIGH QUALITY PRODUCT IN ITS’ APPLICATION FOR THE LUBRICATION & PROTECTION FROM CORROSION & MOISTURE FOR ALL ELECTRICAL AND ELECTRONIC PARTS & EQUIPMENT.

     

    GETSOME 1000 is non-staining, non-corrosive, non-static and non-conductive, but does not affect the current flow when used in any electrical or electronic switches, plugs, circuits, fittings, parts or equipment.

     

     

     

    ELECTRICAL SWITCHES, PLUGS  AND LIGHT FITTINGS:

    Use GETSOME 1000 lubricant to penetrate corrosion and free up switches, bayonet & screw socket light globes, all light fittings, plugs & cable couplings, keeps this type of equipment corrosion free and in good serviceable order for up to 2 years. Spray GETSOME 1000   on screw socket type light fittings, it stops corrosion and makes globes easier to unscrew when replacing, Use GETSOME 1000 to protect against moisture and corrosion, refrigeration unit circuits & cable connectors & plugs used in sea, road and rail containers. Helps prevent short circuit arcing and earth leakage.

     

    RELAYS, SOLENOIDS AND REGULATORS:

    Use GETSOME 1000  to keep relay, solenoid and regulator coils & circuits, contact arms & pivots lubricated and free from corrosion. GETSOME 1000  is very effective in stopping condensation in this type of equipment used in cold storage rooms, freezing works, abattoirs, etc, dramatically reducing instances of short circuits and seizures caused by moisture and corrosion.

    MOTORS, GENERATORS AND POWER BOARDS:

    GETSOME 1000 can be safely spray on field windings & armatures in motors and generators to protect them from moisture and corrosion, lubricates shaft bushes and small pin & ball bearings, helps prevents grounding and seizing. For protection from moisture and corrosion caused by condensation, spray GETSOME 1000 into cold room fan motors and exhaust fan motors used in high moisture areas. Use GETSOME 1000 on power board circuits as a preventive measure against moisture and corrosion, keeps power board relays and solenoids in good operating condition, free from moisture and corrosion.

    CAUTION: GETSOME 1000  can be safely used on all direct, single and multi phase alternating and high tension currents with the one (1) exception, when using the GETSOME 1000 aerosol package, please allow a couple of minutes for the propellant gas(hydrocarbons) to dissipate before switching on the current. This procedure is not required for the non-pressurized packaged product. GETSOME 1000 can be readily removed with most mineral based solvents.

     

    CIRCUITS, MULTI-PIN PLUGS  AND KEY BOARDS:

    GETSOME 1000 frees up sticking computer and word processing equipment key board keys, keeps them free and in a smooth operating condition. Spray GETSOME 1000 into multi-pin sockets and on multi-pin plugs for protection from corrosion and electrolysis caused by condensation, stops plugs sticking and jamming in. GETSOME 1000 keeps circuits free from moisture and corrosion, stops electrolysis.

    CAUTION: Do not use GETSOME 1000 on Recording Heads or Bladder switches (It may affect the operating efficiency of these parts).

     

    MICRO-SWITCHES, VARIABLE CONDENSERS VALVES:

    GETSOME 1000 will remove static caused by condensation and corrosion in variable condensers (allow up to 48 hours to take effect) and tuners, frees up micro-switches and make them fully functional again. Stops electrolysis and corrosion on valve contact pins and always keeps them easy to remove and replace

     

    TELEPHONE SYSTEMS:

    GETSOME 1000 lubricant stops electrolysis between aluminum and stainless steel, keeps fiber optics cable connectors corrosion and moisture free. GETSOME 1000 keeps relays, contact assemblies, circuits and wiring terminals used in telephone hand sets, switch boards and telephone exchanges moisture and corrosion free.

     

    RADIOS, TELEVISIONS AND ANTENNAS:

    In high moisture and coastal areas, GETSOME 1000 will protect radio and television receiver circuits & chassis from moisture and corrosion. GETSOME 1000 protects marine two way radios and other marine electronic equipment from electrolysis and corrosion caused by salt air and condensation, can be sprayed directly into electronic equipment. Use GETSOME 1000 to protect cable terminals on TV antennas and satellite receivers from corrosion.

     

     

    GETSOME 1000 LUBRICANT CAN BE USED FOR PROTECTION AGAINST ELECTROLYSIS, CORROSION AND CONDENSATION FOR ALL ELECTRICAL & ELECTRONIC CIRCUITS, PARTS AND EQUIPMENT.

     

     

    NSF-ImageCERTIFICATIONS

    NSF H-1 for use in Food Processing Areas. Registration #150203 (AEROSOL)

    NSF H-1 for use in Food Processing Areas. Registration #150202 (LIQUID)

     

    DONT BELIEVE US? THEN GETSOME OF THIS!

     

    805ROADKING tried some GETSOME 1000 on his juke box.